Practical operation and maintenance ofcompact electric suv china(Flatbed Truck)

I. Basic information, actual operation and security Assurance matters

1. Control of the retarder: A. The retarder must be separated from the clutch when the engagement is separated. B. Be sure to disengage the retarder when driving normally.

2. Control of the telescopic plate: A. In front of the trolley, the plate should slide down completely and then extend out to obtain a minimum viewing Angle. B. The vehicle is supported behind the flatbed. The flatbed should be slightly off the ground (to prevent friction between the flatbed and the road surface), then all the vehicles slide back onto the flatbed, and then descend for calibration. (2) Telescopic control of the flat plate: A. In front of the trolley, the flat plate should slide down completely and then extend out to obtain a minimum viewing Angle. B. When the vehicle is supported behind the flatbed, the flatbed should be slightly lifted off the road surface (to prevent friction between the flatbed and the road surface), then all slides back onto the flatbed and lower for calibration.

Lifting plate control: A. The rear support arm of the lifting plate does not need to be lowered; B. Learn to lower the lifted vehicle. First, slide all the lifting boards down.

4. Control of the hoist.

5. Control of the lifting of the rear support frame: When the rear support frame is lowered, there is no need to lift the plate.

6. Control the flexion and extension of the rear support arm.

7. Application of tightening zippers.

8. Application of auxiliary wheels. (If the customer selects this machine equipment).

9. Bucket speed control: Under normal circumstances, it should not exceed 40 km/h.

Ii. Simple maintenance and upkeep

1. Filling of lubricating grease.

2. Replace the sealing performance of the hydraulic oil pipeline of compact electric suv china as can be seen from this (Note: When replacing the sealing performance of the lower chamber pipeline of the lifting hydraulic cylinder, the lifting arm should be supported first).

3. The key points for valve cleaning can be found in the "Cleaning Vehicle User Manual".

4. For the replacement of gear oil, please refer to the "Operation Guide for Cleaning and Sweeping Vehicles".

5. During the maintenance and repair of the compact electric suv china chassis, it is essential to strictly follow the provisions of the "Chassis Usage Instruction Manual". The first maintenance of the vehicle chassis must be carried out at a local chassis service point within the legally prescribed mileage; otherwise, the consequences will be very serious.

6. Customers must add antifreeze to their cars based on the specific local temperature; otherwise, the consequences of cylinder liner locking and damage can be very serious.

compact electric suv china https://www.yuanda-export.com/byd-yuan-plus-ev-suv-used-energy-car-byd-atto-3-yuan-plus-for-sale.html